Circuit Breaker, Current And Voltage Transformers, Disconnect And Ground Switches For GIS

Circuit Breaker: GIS uses essentially the same dead tank SF6 puffer circuit breakers used in AIS. Instead of SF6 -to-air as connections into the substation as a whole, the nozzles on the circuit breaker enclosure are directly connected to the adjacent GIS module. Current Transformers: CTs are inductive ring types installed either inside the GIS enclosure or outside the GIS enclosure. The GIS conductor is the single turn primary for the CT. CTs inside the enclosure must be shielded from Read More …

Construction and Service Life of GIS Substation

GIS is assembled of standard equipment modules (circuit breaker, current transformers, voltage transformers, disconnect and ground switches, interconnecting bus, surge arresters, and connections to the rest of the electric power system) to match the electrical one-line diagram of the substation. A cross-section view of a 242-kV GIS shows the construction and typical dimensions. Construction of GIS Substation: The modules are joined using bolted flanges with an “O” ring seal system for the enclosure and a sliding plug-in contact for the Read More …

Electrical Power Distribution with AUTOCAD, DIALux & Etap

* 8 Hours on-demand Video *