General Knowledge

What is the Difference in AC Current and DC Current?

What is the Difference in AC current and DC current and Why do we use Alternating Current for mains electricity? Ok, let’s talk about this most common topic today. And our topic is AC (Alternating Current) and DC (Direct Current).

It does not matter what you do in real life but you have Electricity at your home. That’s means we handle lots of home appliances in our daily life. Now, did we think about which type of power we are using for our daily life? Some home appliance run by AC power and some is run by DC power.

Ok, where did the Australian Rock Band AC/DC get their name? Why, Alternating Current and Direct Current? Both AC and DC describe types of current flow in a circuit. AC and DC power have a long interesting history. Due to their ability, they provide power in different ways.

Related: What Will Happen When You are Struck By Lightning?

What is Alternating Current?

Alternating Current is an electric current that changes its direction periodically. For this reason, the voltage level also reverses along with the current flow. AC power is used to deliver power to houses, industry, etc. We need Generator to generator AC power.

If you are gating electricity at your home then you are already receiving power from any power station near to your home. We can send AC power to a long-distance by stepping up the voltage level. You can have a look at Why is Electricity Transmitted at High Voltage and Low Current?

What is Direct Current?

Direct current is a little bit easier to understand than AC current because DC provides a constant voltage or current. We can store DC power by using Battery like a solar system. The solar panel converts sunlight to DC power and we store it battery then we convert this DC power to AC power by an inverter for our demand. But you can also use DC power without converting.

Related: First Aid Treatment for Electrocution

Differences Between AC Current and DC Current:

We already know that AC current can change direction but DC current cannot. Now I am going to add more to it. First Direct Current, and it was developed by Thomas Edison and the standard of America’s early foray into the world of Electricity involves the use of current that can run into a single direction system.

But unfortunately, Direct Current’s inability to be easily converted into higher/lower voltages led others to look to alternative solutions and it was Namely Nikola Tesla’s AC current. AC current has the capability of alternating and reversing direction 60 times per second (But 50 time in Europe) and AC current could be converted easily to different voltages level using a step up or step down transformer.

Then the ‘War of the Currents’ ensued as the inventors battled for relevance in the future of America’s electrical infrastructure that we are having now. In the end, George Westinghouse partnered with Tesla and leading AC current system into American homes nationwide.

Where we need AC Power?

Yes, our home, office, and industry receive electricity in the form of wave-like AC current and it is capable of changing its direction and voltage level from higher to lower current by using power transformers. You may find a utility pole near to your home where your home is getting electricity.

Now in your home, you are consuming AC power by various home appliances and it can be small and large like your HVAC, TV, Dish Washer, Washing Machine, etc. But for the industry, they use AC power to run their machines to produce essential goods for us.

Where we need DC Power?

Your Car Battery can be a good example of the source of DC power. You can have a look at your car battery now if you have planned to donate your car! Like this, the consistent and constant voltage level of DC power supplies in electronics that use a battery such as your mobile device or camera.

A battery is powering your kid’s remote control car, the boat even some drone that we fly in the sky. The smooth and steady electrical current of DC power always flows in the same direction and it’s between positive and negative terminals.

Related: 33KV Outdoor Electrical Substation Equipment’s

Where we need Both (AC/DC)?

If you are reading this article using a laptop then we can say your laptop uses a combination of both types of electric current. You can have a look at how you connect your laptop? It beginning with AC from the outlet to your charging cord then it converted into DC via the bulky little box (Power Adapter) between the outlet and the end that charging plugs into your computer to recharge the battery.

On the backside of your laptop, you will find a battery. In industry, we use DC to control our machine where AC power drives most of the heavy equipment like a motor.

Now if you find this post useful then please share with your friends and don’t forget to subscribe to our newsletter for the regular electrical update like this. Thanks, Have a Nice Day!

Leave a Comment
Social

Recent Posts

Explore The Pros and Cons of Using Electric Heaters

Electric heaters are truly a benefiting electrical device that has the function of converting a…

2 years ago

Explanation of Power Surge for House

Generally, a power surge can follow in any wire in your very new or old…

3 years ago

Current Transformer – Need, Working, Types, and Losses

Current Transformers (CT) are the devices in which the secondary current used for calculation is…

3 years ago

How to Start and Stop MWM TCG 2020 V 16K Gas Engine Generator?

Recently we installed and commissioned 2nos MWM TCG 2020 V 16K Gas Generator in our…

4 years ago

6 Tips to Choose The Right VFD For Your Electrical Application

If you own a manufacturing plant, a factory assembly line, or any other automated space…

4 years ago

Top 10 Best College or University in India For Electrical Engineering

If you are planning to pursue Bachelor's in Electrical Engineering in India then we have…

5 years ago

ABOUT US | TERM & CONDITIONS | PRIVACY POLICY

 

© 2017 - 2022, By An Electrical Engineer